本文へスキップ

電気用品安全法・PSE・EMC相談 等に関する総合サポート窓口 PSEインフォメーションセンター ┃English

電話でのお問い合わせはTEL.03-3255-8082

お問合せはこちら

Mandatory testingMandatory testing/inspection

A Notifying Supplier shall conduct testing of the manufactured or imported electrical products and keep a record of the testing for three years from the date of the testing. For imported electrical appliances, an importer shall obtain a record of the testing through the foreign manufacturer and keep it.

Mandatory testing/inspection?

1 Specified Electrical Appliances and Materials :Category A
(1) Test within the manufacturing process
Tests performed within the manufacturing process of Category A products shall be carried out routinely on the construction, quality of material and performance of the applicable Category A products in accordance with the method of manufacture of Category A products, by a method recognized as appropriate to making the applicable Category A products conform to the technical requirements. Note: Tests of materials and parts may be substituted for by an incoming inspection at the time of purchase as long as such inspection is recognized as equivalent or superior to the applicable test.

(2) Test of completed articles ・・・100% test are same as below.
Tests of completed products Tests shall be performed on completed Category A products as follows: For fuses (excluding thermal links with containers which are of a non-current-carrying construction),their appearance shall be tested on every product, and for Category A products listed in the left column of the following table, their appearance, dielectric strength, function and matters listed in the right column of the table shall be tested on every product and for other Category A products, their appearance, dielectric strength and function on every product shall be tested also by the method in conformance with the technical requirements.

(3) Test of samples
Inspection of test specimen Testing of specimen randomly selected from the materials, parts, semi-finished and completed products of Category A shall be performed as follows: In the case of a change in the main materials, parts, manufacturing method, or when deemed necessary to bring the applicable materials, parts, semi-finished or completed products of Category A into conformity with technical requirements, tests shall be carried out by the testing methods in conformace with the technical requiremeents. Note: Tests of materials and parts may be substituted for by an incoming inspection at the time of purchase as long as such inspection is recognized as equivalent or superior to the applicable test.

2 Other electrical appliances and materials:Category B 
 Other electrical appliances and materials  outer appearance dielectric strength current
-carrying
 output voltage  scope
・Metal conduits and fittings
・Cable wiring switchboxes
・Fuses
・ Incandescent lamps
・Fluorescent lamps
・Decorative lighting fixtures
 ○ ー  ー  ー   100%
・Belt conveyors
・Barbers' chairs
 ○ ○  ー  ー   100%
・Lithium-ion batteries  ○ ー  ー  ○   100%
・All other electrical appliances and materials  ○ ○  ○  ー   100%

Matters that must be described in the record of testing are the following:

(1) The name and classification of type of the electrical appliance or material and a description of its construction, materials, and performance
(2) The date and place where the test was conducted
(3) The name of the person conducting the test
(4) The quantity of the electrical appliance or material tested
(5) The method of the test
(6) The results of the test

NOTE: Relevant Laws and regulations do not stipulate the usage of particular forms for the record of testing.


Contact:
                       Japanese Page Top


PSEに関するご相談

採 用 情 報



information店舗情報


PSEインフォメーションセンターR


PSEインフォメーションセンター
〒101-0021
東京都千代田区外神田1-3-12
計測器ランド 1階
TEL.03-3255-8082
※現在、コロナ禍によりテレワークを実施しております。お電話でのお問い合わせには対応できません。以下のメールにてお問い合わせ願います。
FAX.03-3251-8258
info@pse-info.com


PSEインフォメーションセンター浜松
〒435-0048 
静岡県浜松市東区上西町60-3



PSEインフォメーションセンター九州
〒812-0015 
福岡県福岡市博多区山王1-6-18




   
最終更新日:2021.8.6

+399,996
秋葉原駅前商店街振興組合